![]()
Locate above plug on your engine, install new data harness from engine to dash, connect gateway to data cable using male/male adapter. Install Option 3 - Add a new data harness direct to your engine ![]() You can add a dust cap to the remaining 4th port on the junction box to avoid water/dust penetration. Connect the engine gateway to the junction box also. Unplug the two plugs from each other and reconnect them to your new junction box using the optional female/female adaptor. Locate the two rectangular plugs connected to each other near your gauges/key switch or remote control (throttle and shift). MARETRON YAMAHA COMMAND LINK TO NMEA 2000 NETWORK ADAPTER MANUALRefer to all safety items and warnings and follow in full to the install manual before attempting. Install Option 2 - Add a junction box under your dash It is not recommended to remove the yellow cap. If you have multiple engines with mechanical shift you will need to connect the VV Mobile kit to both junctions boxes using the optional dual engine instrument adaptor. If you have multiple engines with digital throttle and shift (DTS) use the multi-wake junction box. Locate a spare port and plug in the VV Mobile kit (if there are no spare ports, remove a dust cap). Locate your junction box under the dash (usually boats with digital gauges have existing). ![]() Install Option 1 - Under Dash - Engines with junction boxes or twin/trip/quad engines (most engines have this set up unless they have analogue gauges) Please note if you do not have an NMEA 2000 network on your boat you will need to purchase a NMEA2000 starter pack for all installation options to connect the gateway to your MFD/GPS/Sounder. Includes a NMEA 2000 T connector for easy installation. The Mercury Engine Gateway converts Mercury engine and system data to NMEA 2000 for use on non-Mercury gauges and displays for 1 to 4 engines. Out/In Multi and Single Engine Information (Features available depend on engine and installation) The new Mercury Gateway (single & multi engine) converts engine and system data to NMEA 2000* protocol for use on non-Mercury gauges and displays. Mercury Marine Engine NMEA2000 Gateway 8M0165589
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |